5.0inch HDMI da allon kula da VGA tare da allon LCD Launi TFT LCD Nuni
1.Brightness za a iya musamman, haske iya zama har zuwa 1000nits.
2.Interface za a iya musamman, Interfaces TTL RGB, MIPI, LVDS, SPI, eDP yana samuwa.
3.Display's view kwana za a iya musamman, cikakken kwana da m view kwana yana samuwa.
4.Touch Panel za a iya musamman, mu LCD nuni iya zama tare da al'ada resistive touch da capacitive touch panel.
5.PCB Board bayani na iya musamman, mu LCD nuni iya tallafawa tare da kula da hukumar da HDMI, VGA dubawa.
6.Special share LCD za a iya musamman, kamar mashaya, square da zagaye LCD nuni za a iya musamman ko wani musamman siffa nuni ne samuwa ga al'ada.
Abu | Madaidaitan Dabi'u |
Girman | 50 inci |
Ana goyan bayan ƙudurin LCM | 800(a kwance)*480(A tsaye) |
Kanfigareshan Pixel | RGB-Stripe |
Interface | HDMI/VGA |
Nau'in haɗi | Kebul |
USB (CTP) | Micro-USB |
Maɓalli | 5 key+interface |
Audio | goyon baya |
PCB (W x H x D) (mm) | 105.50*83.40*1.6 |
Mai haɗin LCM | 40PIN-0.5S |
Mai haɗin CTP | 6PIN-1.0S |
HDMI connector | HDMI-019S |
Mai haɗa VGA | 12PIN-2.0P |
Mai haɗa maɓalli | 8PIN-1.25S |
Mai haɗa magana | 4PIN-1.25S |
Abu | Alama | MIN | MAX | Naúrar | Magana |
Samar da Wutar Lantarki | VDD | 0.3 | 3.6 | V |
|
Input Signal Voltage | Vin | -0.3 | VDD+0.3 | V |
|
Ma'anar Fitar Wutar Lantarki | BAYANI | -0.3 | VDD+0.3 | V |
|
Yanayin Aiki | TOPR | -20 | 70 | ℃ |
|
Ajiya Zazzabi | TSTG | -30 | 80 | ℃ |
USB PIN-MAP
Pin | Sigina | Bayani |
1 | VDD | Wutar lantarki (5V) |
2 | - | Data- |
3 | D+ | Data+ |
4 | ID | Babu haɗi |
5 | GND | GND |
HDMI PIN-MAP
Pin | Sigina | Bayani |
1 | Bayanan TMDS 2+ | TMDS Canjin Sigina bambanta 2+ |
2 | Bayanan TMDS2 Sh | Data2 Garkuwar ƙasa |
3 | Bayanan TMDS 2- | TMDS Siginar bambancin canjin canji 2- |
4 | Bayanan TMDS 1+ | TMDS Siginar bambancin canjin canji 1+ |
5 | Bayanan Bayani na TMDS1 Sh | Data1 Garkuwar ƙasa |
6 | Bayanan TMDS 1- | Siginar banbancin canjin canji 1- |
7 | Bayanan TMDS 0+ | TMDS Siginar bambancin canjin canji 0+ |
8 | Bayanan Bayani na TMDS0S | Data0 Gidan Garkuwa |
9 | Bayanan TMDS 0- | Siginar bambancin canjin TMDS 0- |
10 | TMDS Clock+ | TMDS Canjin siginar bambancin agogon + |
11 | Agogon TMDS Sh | Clo6ck Garkuwar ƙasa |
12 | Agogon TMDS- | TMDS Canja wurin agogon sigina daban-daban |
13 | CEC | Lantarki yarjejeniya CEC |
14 | NC | NC |
15 | SCL | Layin Agogo I2C |
16 | SDA | Layin DATA I2C |
17 | DDC/CEC GND | Tashar nunin bayanai |
18 | +5V | + 5V Power |
19 | Hot Plug Detec | Hot Plug Detec |
VGA PIN-MAP
Pin | Sigina | Bayani |
1 | SCL | Shigar da agogon I2C |
2 | SDA | I2C Data shigar da fitarwa |
3 | GND | GASA |
4 | B+ | Bidiyo- shuɗi |
5 | - | Bidiyo- shuɗi |
6 | G+ | Bidiyo-kore |
7 | - | Bidiyo-kore |
8 | R+ | Bidiyo-ja |
9 | - | Bidiyo-ja |
10 | HS | HSYNC |
11 | VS | VSYNC |
12 | GND | GASA |
AZAN LCD&PCBA
❤ Ana iya ba da takamaiman takaddun bayanan mu! Kawai tuntube mu ta wasiku.
A1: Mu ne shekaru 10 na gwaninta masana'antar TFT LCD da allon taɓawa.
►0.96" zuwa 32" TFT LCD Module;
►Babban haske LCD panel al'ada;
► Nau'in mashaya LCD allon har zuwa 48 inch;
►Allon taɓawa mai ƙarfi har zuwa 65";
►4 waya 5 waya resistive touch allon;
►Maganin mataki ɗaya na TFT LCD tare da allon taɓawa.
A2: Ee za mu iya samar da siffanta ayyuka ga kowane irin LCD allo da touch panel.
►Don nunin LCD, hasken baya da kebul na FPC na iya keɓancewa;
►Don allon taɓawa, za mu iya siffanta dukkan allon taɓawa kamar launi, siffa, kauri da sauransu bisa ga buƙatun abokin ciniki.
► Za a mayar da kuɗin NRE bayan jimlar adadin ya kai 5K inji mai kwakwalwa.
►Industrial tsarin, likita tsarin, Smart gida, intercom tsarin, saka tsarin, mota da dai sauransu.
►Don odar samfurori, yana da kusan makonni 1-2;
►Don odar taro, kusan makonni 4-6 ne.
►A karo na farko haɗin gwiwa, za a caje samfurori, za a mayar da adadin a matakin tsari na taro.
►A cikin haɗin kai na yau da kullun, samfuran kyauta ne. Masu siyarwa suna kiyaye haƙƙin kowane canji.
A matsayin masana'anta na TFT LCD, muna shigo da gilashin uwa daga nau'ikan samfuran da suka haɗa da BOE, INNOLUX, da HANSTAR, Century da dai sauransu, sannan a yanka a cikin ƙaramin girman gida, don haɗuwa tare da cikin gida da aka samar da hasken baya na LCD ta atomatik na atomatik da cikakken kayan aiki na atomatik. Waɗannan matakan sun ƙunshi COF (guntu-kan-gilashin), FOG (Flex akan Gilashi) haɗawa, ƙirar baya da samarwa, ƙirar FPC da samarwa. Don haka ƙwararrun injiniyoyinmu suna da ikon tsara haruffan TFT LCD allo bisa ga buƙatun abokin ciniki, siffar LCD kuma na iya al'ada idan zaku iya biyan kuɗin abin rufe fuska na gilashi, za mu iya al'ada babban haske TFT LCD, Flex na USB, Interface, tare da taɓawa da taɓawa. allon kulawa duk suna nan.